ER32 Spring Collet, 3mm Chuck for CNC Engraving Machine Lathe Milling

Description

Document
Description:This ER collet is used for CNC milling lathe tools and work holding engraving machines.Collet must be placed into collet chuck nut before inserting into collet chuck.Install and Disassembly Instruction:Put the collet into the nut, turn it slightly, and wait until the eccentric part of the nut is recessed into the circlip groove, push the collet evenly to fit it into the nut.Install the collet and nut on the chuck body or the spindle of the machine tool together, put the engraving tool into the clamping hole, use a wrench to tighten the nut until the engraving tool is firmly clamped.When replacing the engraving tool, use a wrench to loosen the nut to bring out the chuck and engraving tool, remove the engraving tool, push the collet to make it exit, and then replace the collet with other size as needed.Specifications:Model: ER32Clamping Diameter: 3mmMaterial: 65Mn Spring SteelPrecision: 0.008mm / 0.0003-inchTotal Height: 40mm / 1.57-inchOuter Diameter(Max): 33mm / 1.3-inchPackage Includes: 1 x Spring Collet
ER16 Spring Collet, 3/16" Chuck for CNC Engraving Machine Lathe Milling 2pcs
USD
9.82
ER20 Spring Collet, 3/8" Chuck for CNC Engraving Machine Lathe Milling 2pcs
USD
12.93
ER20 Spring Collet, 15/64" Chuck for CNC Engraving Machine Lathe Milling 2pcs
USD
13.35
ER25 Spring Collet 5/8" Chuck for CNC Engraving Machine Lathe Milling Tool
USD
8.94
ER16 Spring Collet, 5/16" Chuck for CNC Engraving Machine Lathe Milling 2pcs
USD
9.82
ER16 Spring Collet, 3/8" Chuck for CNC Engraving Machine Lathe Milling 2pcs
USD
9.82
ER32 Spring Collet, 3mm Chuck for CNC Engraving Machine Lathe Milling
Description:
This ER collet is used for CNC milling lathe tools and work holding engraving machines.
Collet must be placed into collet chuck nut before inserting into collet chuck.
Install and Disassembly Instruction:
Put the collet into the nut, turn it slightly, and wait until the eccentric part of the nut is recessed into the circlip groove, push the collet evenly to fit it into the nut.
Install the collet and nut on the chuck body or the spindle of the machine tool together, put the engraving tool into the clamping hole, use a wrench to tighten the nut until the engraving tool is firmly clamped.
When replacing the engraving tool, use a wrench to loosen the nut to bring out the chuck and engraving tool, remove the engraving tool, push the collet to make it exit, and then replace the collet with other size as needed.
Specifications:
Model: ER32
Clamping Diameter: 3mm
Material: 65Mn Spring Steel
Precision: 0.008mm / 0.0003-inch
Total Height: 40mm / 1.57-inch
Outer Diameter(Max): 33mm / 1.3-inch
Package Includes:
1 x Spring Collet
Hot Item
ER32 Spring Collet 7/16" Chuck for CNC Engraving Machine Lathe Milling Tool
USD 15.42
ER25 Spring Collet 3/8" Chuck for CNC Engraving Machine Lathe Milling Tool
USD 9.64
ER20 Spring Collet, 3/16" Chuck for CNC Engraving Machine Lathe Milling Tool
USD 8.67
ER16 Spring Collet, 3/8" Chuck for CNC Engraving Machine Lathe Milling 2pcs
USD 9.82
ER16 Spring Collet, 5/16" Chuck for CNC Engraving Machine Lathe Milling 2pcs
USD 9.82
Payment
We ONLY accept Paypal.
Please do not email us to ask for other payment option.
We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
Shipping
Usually we ship your order out within 24 hours in business day.
For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
Return Policy
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
About Us
We are continually expanding our product selection to better serve your need.
We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
Description
Policy
ER32 Spring Collet, 3mm Chuck for CNC Engraving Machine Lathe Milling
Description:
This ER collet is used for CNC milling lathe tools and work holding engraving machines.
Collet must be placed into collet chuck nut before inserting into collet chuck.
Install and Disassembly Instruction:
Put the collet into the nut, turn it slightly, and wait until the eccentric part of the nut is recessed into the circlip groove, push the collet evenly to fit it into the nut.
Install the collet and nut on the chuck body or the spindle of the machine tool together, put the engraving tool into the clamping hole, use a wrench to tighten the nut until the engraving tool is firmly clamped.
When replacing the engraving tool, use a wrench to loosen the nut to bring out the chuck and engraving tool, remove the engraving tool, push the collet to make it exit, and then replace the collet with other size as needed.
Specifications:
Model: ER32
Clamping Diameter: 3mm
Material: 65Mn Spring Steel
Precision: 0.008mm / 0.0003-inch
Total Height: 40mm / 1.57-inch
Outer Diameter(Max): 33mm / 1.3-inch
Package Includes:
1 x Spring Collet
ER16 Spring Collet, 3/16" Chuck for CNC Engraving Machine Lathe Milling 2pcs
USD
9.82
ER20 Spring Collet, 3/8" Chuck for CNC Engraving Machine Lathe Milling 2pcs
USD
12.93
ER20 Spring Collet, 15/64" Chuck for CNC Engraving Machine Lathe Milling 2pcs
USD
13.35
ER25 Spring Collet 5/8" Chuck for CNC Engraving Machine Lathe Milling Tool
USD
8.94
ER16 Spring Collet, 5/16" Chuck for CNC Engraving Machine Lathe Milling 2pcs
USD
9.82
ER16 Spring Collet, 3/8" Chuck for CNC Engraving Machine Lathe Milling 2pcs
USD
9.82
Hot Item
ER32 Spring Collet 7/16" Chuck for CNC Engraving Machine Lathe Milling Tool
USD 15.42
ER25 Spring Collet 3/8" Chuck for CNC Engraving Machine Lathe Milling Tool
USD 9.64
ER20 Spring Collet, 3/16" Chuck for CNC Engraving Machine Lathe Milling Tool
USD 8.67
ER16 Spring Collet, 3/8" Chuck for CNC Engraving Machine Lathe Milling 2pcs
USD 9.82
ER16 Spring Collet, 5/16" Chuck for CNC Engraving Machine Lathe Milling 2pcs
USD 9.82
Payment
We ONLY accept Paypal.
Please do not email us to ask for other payment option.
We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
Shipping
Usually we ship your order out within 24 hours in business day.
For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
Return Policy
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
About Us
We are continually expanding our product selection to better serve your need.
We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
On Mar-27-22 at 11:24:17 PDT, seller added the following information: